A leakage from a roof can cause a lot of damage to a home. You may not assume that the roof of your home will leak, but an accident is in a small corner. Always ensure that you are alert. Do you even see a small damp spot on your ceiling? Then immediately call on a roofer to solve the problem. If you act quickly, the damage may be limited and it will not cost you unnecessary money.
What are the causes of roof leaks?
A leaking roof can have many different causes, but mainly roof leaks are caused by changing weather conditions. In the summer the temperature can rise considerably and in the winter it can be quite cold. This can cause damage to the roof. If it rains heavily in spring and autumn, the roof may not be able to tolerate all of this and a leak will occur.
On a flat roof, the chance of a leak is much greater. Water can remain on this roof after a heavy rain shower. If this cannot flow away within the foreseeable future, it can leak through the roof. Therefore always ensure that you keep the drain of your flat roof and any gutters clean. This way the water can simply drain away and a leak is less likely to occur.
Repair a leak on a flat roof
When water comes in through the flat roof of your home, it’s important to act quickly. When it comes to large amounts of water, people choose to place buckets or bins to collect the water. However, do not wait too long to repair the leak, since the damage may only get worse. You can call in a professional roofer to close the leak. He can ensure that the leak in your flat roof is resolved in no time. However, you can also correct the leak yourself. Then you can go through the following step-by-step plan.
A step-by-step plan for correcting roof leaks on a flat roof leakage cause solution maintenance
Detecting
a problem To remedy a leak, you must, of course, know where the problem is. It is therefore important first to look for the core of the leak. Therefore, carry out an inspection of your roof as quickly as possible. You can simply go on the roof and you will probably have found the cause quickly.
Cleaning the roof
Before you start repairing the leak on your flat roof, it is important to thoroughly clean the affected area. Use only tools that cannot cause further damage to the roof. If you do this, there is a chance of even more leaks.
Cross-cutting
Once you have cleaned everything, you can cut across where the roof is leaking. You must all fold over the four points that arise. The underlying roof boarding must also be thoroughly cleaned and dried before you start applying the repair paste.
Applying paste
Did you clean and dry the roof boarding? Then you can apply the repair paste. This paste is available in almost every hardware store. You can apply it with a putty knife. When you have applied the paste, you can spread it further on the spot with a brush.
Folding
Once the paste has been applied to the roof covering, you can fold back the four points. Press the whole well and provide the seams with an extra layer of repair paste. To top it all off, place a strip of glass fiber over the spot where the leakage was. Finally, cover the entire surface again with repair paste and your leakage must be remedied.
By following the above steps you can easily clear the flat roof leaking problem.
